Santa Clarita Copper Repiping and Slab Leak Repair Cost

A repipe is the procedure where the old piping in your home or a building are upgraded with new ones. All water line fittings, supply lines and water valves are changed out. this typically results in a lot better water pressure and a great deal better quality water.

Should We Repipe the house in Santa Clarita, CA?

Many reasons exist for why a person may want to replace the pipes of your house.

For houses with galvanized plumbing:

Galvanized water pipes are located in houses constructed during the 80s. A galvanized pipe is an iron water pipe which is coated with zinc to be protected from corrosion. However the zinc coating slowly corrodes over time exposing the iron, along with corrosion build-up.

Usual Slab Leak Issues:

Decreased Water Pressure – The particular reason why might be the restriction of the water flow caused by corrosion and rust buildup inside of the galvanized water line.

Rusty Water – Corrosion typically goes into the water fixtures. This indicates a high level stage of deterioration in the plumbing.

Leaky Pipes – Leaks are caused by corrosion of the galvanized iron pipes. Undetected leaking may develop inside the walls, within the attic as well as under the residence, building up the chances of serious damage to the home.

For houses with polybutylene water lines:

This type of plastic pipe was used widely in the middle of the 70’s to mid 90’s. At the time it had been regarded as the next technological advancement for water lines and fittings. Polybutylene water systems were found to be installed in millions of houses before it was determined to be highly flawed. Basically 50% of most houses built in this period of time continues to have this type of pipe in the house.

Polybutylene water pipes have an extremely short lifespan, because nasty chemicals in regular city water causes it to solidify and change into brittle. The fittings often burst open first, and then the water line itself.

Polybutylene water lines are made up of flexible plastic piping, colored grey when used inside and black or blue outside. Various fittings are made with both metal and plastic. Insert fittings are used to join up pieces of polybutylene pipe.

For homes with copper plumbing located in the slab.

Slab leaks are generated by copper or some other piping becoming corroded from certain soil and water conditions under the floor of the house.

Slab Leak Symptoms:

  • Water leaking in your foundation.
  • Water sounds like it is running even when the faucets are off.
  • Your water meter indicates water running even though the water is turned off.
  • Extraordinary significant water costs.
  • Nearby neighbors have already experienced a leaking slab.
  • You have had a slab leak before.

Important things about a Repipe

  • Increased water pressure
  • Forget about the rust color or bad tasting water
  • Clean, crystal-clear water
  • Having the capacity to turn on several faucets at the same time
  • Higher quality water pipes without having any more leaky water lines.
  • No skin scalding in your shower if somebody turns on your faucet or flushes.
  • More reassurance since your piping system is secure.
  • Favorable selling point for your property.

When you hire a local plumber or other business to do the job, it’s very likely going to cost you more in the long run when you consider that you are going to have to hire a drywall repair provider to replacement patch over the many repair points. Any time you seek the services of a repipe company with a master patcher on staff such as Repipe Specialists, you’ll never be required to pay out extra money or time getting your home back to normal. From beginning to end, the PEX and Copper repiping operation usually takes merely 2 or 3 days.