PEX Repipe and Slab Leaks Cost in Walnut, CA

A repipe is a procedure where your existing pipes in a house or a building are upgraded with new ones. All water line fittings, supply lines and water valves are replaced. this usually produces even better water pressure and more suitable quality water.

Should We Repipe our home in Walnut, CA?

Many reasons exist for why you should upgrade the piping in your home.

For residences with galvanized water lines:

Galvanized piping can be found in houses constructed through the 1970’s. A galvanized pipe is an iron water pipe which is zinc coated to be protected from corrosion. Typically the zinc coating progressively wears away over the years exposing the iron, accompanied by oxidation build-up.

Well-known Slab Leak Issues:

Minimal Water Pressure – The key reason why might be the reduction of the water flow as a consequence of rust and corrosion build-up within the galvanized water line.

Rust Colored Water – Rust often finds it’s way into the fixtures. This indicates a highly developed stage of corrosion in the piping.

Leaky Pipes – Leaks are most commonly a consequence of corrosion of the galvanized pipes. Concealed leaking may develop in the walls, in the attic and underneath the home, generating the potential for considerable damage to your property.

For residences with polybutylene water pipes:

This style of plastic pipe was commonly used from the middle of the 70’s to early 90’s. At the time it was thought of as the next plumbing technology improvement for water lines and water fixtures. Polybutylene water systems were installed in millions of places of residence before it was listed as highly defective. About 60% of all family homes built in this period of time is still equipped with this kind of pipe in the house.

Polybutylene water pipes have an exceptionally short lifespan, considering the fact that harsh chemicals in regular city water causes it to harden and develop into brittle. The fittings commonly burst first, followed by the pipe itself.

Polybutylene water lines consist of flexible plastic pipe, grey when for indoor use and blue or black for outdoor usage. Quite a few fittings were created with both plastic and metal. Insert fittings are then used to join pieces of polybutylene pipe.

For homes with copper plumbing situated in the slab.

Slab leaks originate from copper or some other pipes becoming corroded from certain soil and water conditions under the floor of the house.

Slab Leak Symptoms:

  • Water leaking through the foundation.
  • Water sounds like it is running even when the faucets are turned off.
  • Your water meter displays water running when your water is shut off.
  • Very large water charges.
  • Others who live nearby have had a leaking slab.
  • You have had a slab leak before.

Features of Copper or PEX Repiping

  • Increased water pressure
  • Get rid of rusty or stinky water
  • Sparkling clean, clear water
  • The ability to turn on more than one faucet at once
  • High quality plumbing with no more leaking pipes.
  • No burning in the shower when someone turns on your faucet or flushes.
  • More confidence because your piping system is protected.
  • Effective selling point for your property.

When you employ a plumbing service or other organization to perform the job, it’s most likely going to cost you more in the long run if you consider that you will have to hire a drywall repair company to patch over the many repair points. As soon as you retain the services of a repipe company with a master patcher on staff such as Repipe Specialists, you will never be required to invest extra money or valuable time getting the house back to original condition. From beginning to end, the PEX and Copper repipe procedure usually takes only 2 or 3 days.