Los Angeles, CA PEX Repipe and Slab Leak Costs

A repipe is a treatment where your existing water pipes in your home or a building are upgraded with brand new ones. All pipe fittings, supply lines and water valves are exchanged. this generally leads to better water pressure and even better quality water.

Should I Repipe our home in Los Angeles, CA?

Many reasons exist for why you should upgrade the water pipes of your house.

For residences with galvanized water pipes:

Galvanized piping are located in homes built in the 80’s. A galvanized pipe is an iron pipe which is zinc coated to be protected from corrosion. Regretfully the zinc coating steadily corrodes over time revealing the iron, followed by oxidation build-up.

Regular Slab Leak Conditions:

Decreased Water Pressure – The reason might be the reduction in the water flow caused by rust and corrosion buildup in the galvanized pipe.

Rusty Water – Rust generally finds it’s way to the water fixtures. This means that an advanced stage of deterioration in the pipes.

Leaking Pipes – Leaks are most frequently the result of corrosion of the galvanized iron pipes. Hidden leaks may develop inside of the walls, in the attic as well as underneath the house, creating the potential for major damage to the home and property.

For residences with polybutylene plumbing:

This kind of plastic pipe was used widely from the middle of the 70’s to mid 90’s. At the time it had been perceived as the next plumbing technology improvement for water lines and water fixtures. Polybutylene water pipe systems had been installed in millions of homes prior to being determined to be highly flawed. Practically 75% of all of the properties constructed during this timeframe continues to have this form of water pipe in the house.

Polybutylene pipes have an enormously short life span, considering that chemicals in regular city-provided water makes it solidify and change into brittle. The fittings commonly burst open first, and then the water pipe itself.

Polybutylene pipes are made up of flexible plastic piping, gray when used inside and black or blue outside. A number of fittings are manufactured with plastic and metal. Insert fittings are used to join up sections of polybutylene pipe.

For houses with copper plumbing in the slab.

Slab leaks are generated by copper or any other piping becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water is leaking through the foundation.
  • Water sounds like it is running even when the faucets are off.
  • Water meter indicates your water is running whether or not the water is off.
  • Very excessive monthly water charges.
  • Next door neighbors already have experienced a leaking slab.
  • You have had a slab leak before.

Rewards of Copper Repiping

  • Boosted water pressure
  • Forget about rust colored or bad tasting water
  • Clean, crystal clear water
  • Having the capacity to use several faucets at the same time
  • Extremely high quality water pipes with no more leaky pipes.
  • No scalding skin from the shower if someone else turns on your faucet or flushes.
  • More reassurance when your piping system is dependable.
  • Beneficial selling point for your property.

When you employ a plumbing service or other firm to get the job done, it’s perhaps going to cost you more in the long run if you consider that you are going to have to retain the services of a drywall repair business to patch over the various entry points. As soon as you hire a repipe business with a master patcher on staff such as Repipe Specialists, you’ll never have to invest more money or time in getting your household back to normal. From start to finish, the PEX and Copper repipe process will take just 2 or 3 days.