Lancaster, CA Copper-PEX Repipe and Slab Leaks Cost

A repipe is a procedure where the existing piping in your home or a building are replaced with brand new ones. All water pipe fittings, stop valves and supply lines are upgraded. this typically results in much better water pressure and better quality water.

Should I Repipe our home in Lancaster, CA?

There are many reasons why a person might need to upgrade the piping of your home.

For residences with galvanized plumbing:

Galvanized water pipes can be found in homes constructed during the 80s. A galvanized pipe is an iron pipe which is zinc coated to be protected from corrosion. The sad thing is the zinc coating regularly wears away over the years exposing the iron, together with oxidation buildup.

Common Slab Leak Issues:

Very Low Water Pressure – The particular reason why could be the restriction in the water flow because of rust and corrosion buildup inside of the galvanized water pipe.

Rusty Water – Oxidation typically goes into the fixtures. This suggests a high level stage of rust in your piping.

Leaking Pipes – Leaks are most commonly the result of corrosion of the galvanized pipes. Concealed leaks may develop in the walls, inside of the attic as well as beneath the house, building up the risk of serious damage to the house and property.

For residences with polybutylene pipes:

This style of plastic water line was widely used from the middle of the 70’s to early 90’s. At the time it was reportedly the next plumbing technology advance for pipes and fittings. Polybutylene water line systems were found to be installed in millions of places of residence prior to being judged as highly substandard. Just about 50% of all of the properties constructed during this period of time still has this category of pipe in the home.

Polybutylene pipes have an enormously short life span, considering the fact that harsh chemicals in ordinary city-provided water makes it harden and develop into brittle. The fittings typically break open first, and then the pipe itself.

Polybutylene water lines are made up of flexible plastic piping, colored grey when used inside and black or blue for outdoor usage. Some fittings are made with both plastic and metal. Insert fittings are used to join up sections of polybutylene pipe.

For houses with copper plumbing based in the slab.

Slab leaks originate from copper or other piping becoming corroded from certain soil and water conditions under the floor of the house.

Slab Leak Symptoms:

  • Water leaking through the foundation.
  • Water is running even when no faucets are on.
  • Water meter shows the water is running when the water is turned off.
  • Very substantial monthly water charges.
  • Next door neighbors have already experienced a slab leak.
  • You experienced a previous slab leak.

Great things about a Repipe

  • Much better water pressure
  • No more rust colored or bad tasting water
  • Clean, clear water
  • Being able to turn on several faucets at once
  • Higher quality water pipes without having any more leaky water lines.
  • No scalding in the shower if somebody turns on your faucet or flushes.
  • A lot more peace of mind because your piping system is protected.
  • Positive selling point for your property.

If you employ a local plumber or other firm to complete the task, it’s probably going to cost more in the long run if you consider that you are going to have to retain the services of a drywall repair company to replacement patch over the various repair points. Whenever you seek the services of a repipe company with a master patcher on staff such as Repipe Specialists, you’ll never be required to spend extra money or time in getting your home back to normal. From start to finish, the PEX and Copper repiping process normally takes only a couple of days.