Copper Repipe and Slab Leak Repair Cost in Los Angeles, CA

A PEX or Copper repipe is a procedure where your existing piping in your home or a building are upgraded with brand new ones. All water pipe fittings, stop valves and supply lines are changed out. this generally results in even better water pressure and better water quality.

Should I Repipe our house in Los Angeles, CA?

Many reasons exist for why a person needs to replace the water pipes in your home.

For residences with galvanized water lines:

Galvanized piping are located in houses constructed during the 1980’s. A galvanized pipe is an iron water line which is zinc coated for corrosion protection. Unfortunately the zinc coating gradually deteriorates over the years revealing the iron, accompanied by corrosion build-up.

Well-known Slab Leak Issues:

Very Low Water Pressure – The particular reason why may be the restriction of the water flow brought on by rust and corrosion build-up inside of the galvanized water line.

Rust Color Water – Corrosion normally finds it’s way into the water fixtures. This means an advanced stage of corrosion in your water lines.

Leaky Pipes – Leaks are a result of corrosion of the galvanized pipes. Obscured leaking may develop within the walls, within the attic or beneath the house, building up the potential for significant damage to the home and property.

For residences with polybutylene water pipes:

This particular plastic water line was frequently used from the mid 70’s to the early 90’s. It was regarded as the next great advancement for pipes and fittings. Polybutylene water systems ended up being installed in millions of houses before it was judged as highly substandard. Roughly 75% of all of the houses built during this time period still has this variety of pipe in the house.

Polybutylene water pipes have an exceptionally limited life span, because chemical contaminants in common city-provided water causes it to harden and become brittle. The fittings commonly burst open first, and then the water pipe itself.

Polybutylene water pipes are made up of flexible plastic pipe, grey when used inside and blue or black for outdoor usage. A number of fittings were created with metal and plastic. Insert fittings are then used to join up sections of polybutylene pipe.

For houses with copper plumbing located in the slab.

Slab leaks are caused by copper or other piping becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water is leaking in your foundation.
  • Water is running even when the faucets are off.
  • Your water meter shows the water is running even when the water is turned off.
  • Very higher monthly water charges.
  • Neighbors have experienced a slab leak.
  • You have had a slab leak before.

Reasons to like a Repipe

  • Much better water pressure
  • You can forget about rust colored or smelly water
  • Clean, clear water
  • Being able to turn on several faucets at a time
  • High quality plumbing with no more leaking pipes.
  • No burnt skin in your shower if someone else turns on your faucet or flushes.
  • Increased relief because your piping system is secure.
  • Advantageous feature for the property.

When you employ a plumbing technician or other company to complete the task, it’s perhaps going to cost more in the long run when you consider that you’ll have to retain the services of a drywall repair service company to replacement patch over the many repair points. When you retain the services of a repipe company that features a master patcher on staff such as Repipe Specialists, you will never be required to invest more money or time in getting your house back to normal. From start to finish, the PEX and Copper repipe process will take only two or three days.