Agoura, CA Repipe and Slab Leak Repair Cost

A Repipe is a procedure where your existing pipes in a house or a building are upgraded with brand new ones. All pipe fittings, stop valves and supply lines are swapped. this normally results in much better water pressure and more suitable water quality.

Should We Repipe our house in Agoura, CA?

There are many reasons for why you might need to upgrade the piping of your home.

For residences with galvanized water lines:

Galvanized piping can be found in homes built during the 80s. A galvanized pipe is an iron water line which is coated with zinc for corrosion protection. However the zinc coating slowly and gradually wears away over time exposing the iron, and then corrosion buildup.

Prevalent Slab Leak Indicators:

Reduced Water Pressure – The reason might be the limitation in the water flow due to rust and corrosion buildup inside of the galvanized pipe.

Rusty Water – Oxidation generally goes into the water fixtures. This means a high level stage of deterioration in your piping.

Leaky Pipes – Leaks are most commonly brought on by corrosion of the galvanized iron pipes. Concealed leaking may develop inside the walls, inside of the attic or under the residence, building up the potential for substantial damage to your home.

For residences with polybutylene pipes:

This kind of plastic pipe was commonly used in the mid 70’s to early 90’s. At the time it was considered to be the next technological advance for pipes and fixtures. Polybutylene water pipe systems turned out to be installed in millions of houses prior to being listed as highly substandard. Approximately 65% of most houses built in this time frame is still equipped with this kind of water pipe in the home.

Polybutylene pipes have an exceptionally limited lifespan, since chemical compounds in average city-provided water causes it to harden and change into brittle. The fittings quite often start leaking first, and then the pipe itself.

Polybutylene water pipes are made up of flexible plastic pipe, colored grey when used inside and black or blue outside. Several fittings are made with both metal and plastic. Insert fittings are then used to join pieces of polybutylene pipe.

For houses with copper plumbing based in the slab.

Slab leaks develop from copper or some other pipes becoming corroded from certain soil and water conditions under the floor of the house.

Slab Leak Symptoms:

  • Water is leaking through the foundation.
  • Water sounds like it is running even when the faucets are turned off.
  • Your water meter indicates the water is running even if the water is turned off.
  • Abnormally significant monthly water utility bills.
  • Neighbors already have experienced a leaking slab.
  • You have had a previous slab leak.

Important things about Copper Repiping

  • Heightened water pressure
  • You can forget rust color or foul tasting water
  • Nice and clean, crystal-clear water
  • Being able to use several faucets at once
  • High quality plumbing with no more leaking water lines.
  • No burning in the shower if someone else turns on your faucet or flushes.
  • More reassurance because your piping system is secure and safe.
  • Advantageous selling feature for the property.

If you hire a plumbing service or other business to do the job, it’s possibly going to cost you more over time if you consider that you are going to have to employ a drywall repair service business to patch over the many repair points. Whenever you hire a repipe business that has a master patcher on staff such as Repipe Specialists, you will never be required to pay out additional money or valuable time in getting your home back to normal. From beginning to end, the PEX and Copper repipe process takes just a few days.